Alpkit Confucius handlebars

Equipment Review

My bike set up has changed quite a lot since I first dipped my toe into the world of bikepacking. My initial forays were just with a dry bag stuck on the handlebars, held on by a couple of bungee cords. Ultimately though once I got more involved it was clear something a little more durable would be needed to make the whole experience a little more enjoyable.

When I started planning for my Tour Divide trip I got myself my Travers Russ Ti, with some customisations to make it a perfect (for me) TD bike.

Initially I ordered the frame with Travers own Ti flat bars, needing a decent way of attaching all the kit I stumbled across BarYak whilst googling for ideas. I got the BarYak bars and set it all up, they are really sturdy and work excellently. Ultimately for me though I just couldn’t get used to the bend on the Travers bar, it is a lot shallower than what I am used to, so I transferred the BarYak onto Tom’s bike and that is what he used for the Divide, with the standard Trek bar that came on his Superfly. I moved on and then tried the Jones bar.

Apidura and Alpkit
Travers Rusty

The Jones bar is *REALLY* good, I had it on my bike for the Divide and it was absolutely faultless, so comfortable and if I am ever doing another long trip it will be going back on for the duration as it is just so good. Just excellent for day after day of riding, it gave me very little in the way of aches and pains from my hand position. The fact you can move your hands around when you are tired is great and you can get into a real aero tuck when bombing down those Montana gravel roads too!

Incredible ride in this morning, I took the scenic route, it was tempting to carry on! #sdnpa #southdowns #tilushness @traversbikes #RussTi @use_exposurelights #revo
On the trail day 17

Ultimately though now my life is back to ‘normal’ after my Divide trip I wanted to switch back to a bar that would give me more of a normal MTB feel for the Travers. As I’m only likely to be doing one bivvy a month and maybe a couple of two night trips this year the bulk of my riding on the Travers will be unloaded. The new Alpkit Confucius bar gives you a normal MTB like handlebar position and you still have the loop to attach your luggage when you need to.

To me the bend was far more what I’m used to on my other bikes and it brings back the rowdy trail feel to the Travers that it just lacked a little with the Jones bar on it. What’s more it’s at a great price too.

February 2017 Bivvy
February 2017 Bivvy

Here’s a couple of unloaded photos to show the clearance and the bar position I use. As you can see I have my bars up a bit with a few spacers under the stem, this gives me about 280mm of clearance, which is more than enough for the Apidura bar bag.

Confucius

I have the bar tipped up slightly, this gives me the sweep angle of the handlebar that I find the most comfortable. I found that if the loop was more level the sweep of the handlebar was not as comfortable.

Confucius

So with it slightly tipped up the sweep angles back nicely.

Confucius

The only negatives I found were the bars were actually wider than it said on the Alpkit web site, though that is not really a problem for most, you can always cut them down of course. Just make sure that if you do cut them down you measure and don’t take the cut marks on the bar as gospel as they are not correct.